Exchange 2010 hybrid, SMTP, SSL Certificates and Subject Alternative Names

On every Exchange server you need SSL certificates for authentication, validation and encryption purposes. For SMTP you can use the self-signed certificate. Exchange 2010 uses opportunistic TLS, so the self-signed certificate will do in this scenario. If you need to configure domain security (mutual TLS) on Exchange, you need a proper 3rd party SSL certificate for this.

SMTP communication between Office 365 and Exchange in a hybrid scenario is an example of mutual TLS or domain security. A proper 3rd party SSL certificate is needed on your Exchange server.

I was always under the impression that mutual TLS can only use the Common Name of the certificate, which in my scenario is After a previous blogpost there was an interesting discussion (see the comments of this particular blogpost) about this, so now it’s time to do some testing.

Originally I had a Digicert SSL certificate with Common Name, and a Subject Alternative Name entry During the HCW I entered and selected the proper certificate.

It was time to renew my SSL certificate, so I added an additional SAN entry


When running the Hybrid Configuration Wizard again on my Exchange 2010 server I select the proper SSL Certificate:


And entered the additional FQDN


When validating the connector it succeeds successfully, but when you look closely it still uses the old FQDN


I would expect the new FQDN here, but apparently the HCW does not reconfigure the Office 365 Receive Connector on my Exchange 2010. It still is configured for


So, after changing it to


The validation process again succeeds successfully, but now uses the FQDN (and SAN entry on the SSL certificate) for mail flow from Office 365 to Exchange 2010:


So, in contrast to my previous belief you don’t need a separate SSL certificate for an additional FQDN but you can also use an additional SAN entry on your existing SSL certificate.

More information regarding certificate requirements for hybrid deployments can be found here:

Why do you want to use this in the first place?

When using one or two Exchange 2010 servers it doesn’t make sense, but I also have a customer that has 28 Exchange 2010 servers running with 40,000 mailboxes, and here we want to separate Office 365 SMTP traffic from regular SMTP traffic. When looking at the certificates it’s easier to maintain only one SSL certificate with an additional SAN entry then an additional SSL certificate with just one domain name.

Special thanks to ‘Trekveer Harry’ for pointing me in this direction Smile

3 thoughts on “Exchange 2010 hybrid, SMTP, SSL Certificates and Subject Alternative Names”

Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s