Tag Archives: HAFNIUM

Rebuild your Exchange Server (after HAFNIUM infection)

If you are unlucky and your Exchange server is infected because of the HAFNIUM zero-day vulnerability, you must nuke your Exchange server and rebuild it. And I already got the first questions on how to do this. It is not that difficult and does not take days of time if some prerequisites are met of course.

Note. This blog was written with the HAFNIUM infected machines in mind, but from a procedural point of view it can be used for every disaster recovery scenario of course. Also, I used Windows 2012 R2 and Exchange 2013 for this blog, but this procedure can also be used for Exchange 2016 and Exchange 2019.

Basically, what happens is that the old server is forcibly removed (shutdown, delete VM) but that the computer account in AD is not deleted but reset (shown in screenshot below). A new server is built, same OS, same patching, same configuration, same computername and joined to the domain. This way the SID will remain the same, which makes recovering a lot easier.

Rebuilding Windows server including all prerequisite software and Windows patches will take most of the time in this entire process.

You must use the same server version when rebuilding the server. So, if you old server was running Windows 2012 R2, then you MUST use Windows 2021 R2 again. If you try different, bad things will happen.

Exchange is a bit more flexible these days. You can use the /RecoverServer option with a newer Cumulative Update. For example, when your old server is running Exchange 2016 CU11, you can do a /RecoverServer with Exchange 2016 CU19. The only drawback here is that the CU11 version information is stored in Active Directory, and even when CU19 is used, it will show up as CU11 for the AdminDisplayVersion. But that’s cosmetic and will automatically be corrected the next time a new CU is installed.

What you CANNOT do is use /RecoverServer to upgrade to a newer version of Exchange, like upgrading from Exchange 2013 to Exchange 2016. Again, bad things will happen.

Storage with Mailbox database need of course to be kept. If configured on separate disks of VHD’s you must connect these to the new server. Use the same drive letters or mount points. In the screenshot below the old disk with the Mailbox database is mounted to the new VM with Windows 2012 R2. Exchange 2013 is not yet installed on this server.

Note. Instead of my approach (connecting the existing storage) it is also possible to recover the server and restore the mailbox database later from backup. This can range from any backup application to a file level backup of your .EDB file. The latter needs extensive knowledge about the Mailbox database internals and how to deal with that.

When Windows is up and running it is time to install the server. Use the same Cumulative Update for this and use the unattended setup of Exchange with the RecoverServer option. Open a command prompt with elevated privileges and execute the following command:

Z:> Setup.exe /mode:RecoverServer /IAcceptExchangeServerLicenseTerms

Z:\ in this case is the DVD drive letter, but you can use a different drive letter of course.

There’s one catch here. If Exchange is installed in a different location, for example on the D:\ drive, you must use the /TargetDir option to specify the location where the Exchange binaries must be installed.

The /RecoverServer will retrieve all configuration information from Active Directory (instead of using the default settings) and install Exchange using this configuration. For example, all Mailbox database information is stored in Active Directory, so when setup has finished, the ‘new’ server has all the correct Mailbox database information. Even better, after a reboot it will even automatically mount the Mailbox databases.

Some settings are not stored in Active Directory, especially when looking at server specific configuration that are stored in local .config files. OWA customization and SSL Certificates for example that are configured on the server are lost. So, existing documentation of the Exchange server is vital here to quickly rebuild the Exchange server.

After reinstallation, the server was rebooted, I had to mount the Mailbox database manually (but without issues). The following settings I had to configure manually:

  • Import the SSL certificate and bind it to the Exchange services.
  • Set the Exchange Virtual Directories (I did not expect this one).
  • Relocate the SMTP Queue database.

To my surprise the SMTP relay connector that was configured on the Exchange server was available instantly and working correctly.

Summary

If you have to rebuild your Exchange server, whether it be it crashed or got infected or something, you can use the Setup.exe /RecoverServer option of Exchange (Exchange 2013 and up). This will retrieve a lot of the information from Active Directory, and if you have the Mailbox databases available you can use these directly without any restore from backup activities.

There are some settings that are still manually configured after the server is recovered, so proper documentation is important to have to make life much easier when recovering.

Last updated: March 10, 2021

Hafnium and Exchange mitigation and remediation

Last week Microsoft discovered a zero-day vulnerability for Exchange (which was initially detected by security companies last January) and an urgent patch was released. Unfortunately this patch is only available for recent versions of Exchange 2019 and Exchange 2016 and the last version of Exchange 2013. If you have an older version of Exchange running you have to bring it to the latest Cumulative Update first and then deploy the Security Update.

There are some mitigation rules available though:

  • Exchange server that are not available on the Internet are much less vulnerable (ok, this is an open door, I know). I have two customers that have their Exchange servers available only via a VPN connection. This works well from a security perspective.
  • Similar to the previous bullet, Exchange hybrid servers should not be publicly available, only Exchange Online must be able to access the Exchange on-premises servers. URL’s and IP ranges can be found on https://docs.microsoft.com/en-us/microsoft-365/enterprise/urls-and-ip-address-ranges?view=o365-worldwide.
  • Microsoft also posted a number of mitigation rules on the Microsoft Security Response Center Blog. These mitigation rules are temporary though and should only be used until the Exchange servers are fully patched. Mitigation rules are an IIS Re-Write Rule, disabling UM services and disable OAB en ECP Application Pool.

Microsoft has published a script (Test-ProxyLogon.ps1) on GitHub that can be used to check your Exchange servers if they are compromised. This script can be found on CSS-Exchange/Security at main · microsoft/CSS-Exchange · GitHub.

When you run the script it will show in seconds if something is found:

Too bad that this is a production Exchange 2016 server that was compromised.

At this moment I would recommend to turn off and remove the Exchange server and rebuild it using the /Mode:RecoverServer option of the Exchange setup application. This is documented in my next blog Rebuild your server (after HAFNIUM infection. When other (better or easier) recommendations are published I’ll update this blog.

Last updated: March 10, 2021